Home > Products > Water Purification > Wellness Water Media Guard

The Wellness MG-III Premium Home Filter

Imagine the quality of life if you had spring quality water
everywhere - wherever and whenever you want

The Most Advanced Water Filtration and Enhancement System in the World:

• Eliminates cartridges & replacement parts Automatic regeneration while you sleep
• Constructed of polished, all-weather stainless steel

Purifies to Leave only Beneficial Components:

• Produces clean, pure, natural tasting water Reduces chlorine and other harmful contaminants Conditions the water without chemicals or salts
• Provides 24-hour protection against contamination

The Wellness MG-III Whole House Water Purification Unit

This is the ultimate water filtration and enhancement system for the home, office or commercial application. Imagine having purified (better-than-bottled-quality) water available from every faucet, shower and toilet in the house. The Wellness Home¨ treats all of the water entering your residence and ensures you that it will protect your home and family from pollutants and unwanted tampering with the water supplies. It is designed to work on both municipal and well water.You will be amazed at the beneficial effect this water has on your skin and hair with just one bath or shower. You will also discover why some of the finest restaurants in America use Wellness Filtered water for cooking and table water.

Unlike conventional water filters, the Wellness Filter¨ has a permanent filter media which is regenerated by periodic backwashing. As a result, it does not require expensive replacement filter cartridges and the owner is spared the concern and expense of maintenance, chemicals and replacement parts. The Wellness Filter¨ employs mechanical and absorptive filtration and water enhancement by utilizing six types of natural filtering media, arrayed in nine treatment layers. This regeneration feature will give the average user continuous use for up to 20 years at a cost of less than 5 cents per gallon.

FEATURES AND BENEFITS

• Purification - provides a broad spectrum of purification including chlorine, chlorination byproducts, organics, heavy metals and radioactive compounds.
• Automatic - eliminates the need for replacement cartridges, salt, chemicals and routine servicing. The Wellness Home¨ automatically backwashes itself each week while you sleep. The backwashing purges the filter of accumulated pollutants and revitalizes itself for years of maintenance-free use.
• Enhancement - contains the patented enhancement media that is the signature of all Wellness Filter products. The enhanced water will improve your home in ways that you might never realize.

Some of these include:

• Protects your expensive bath and kitchen fixtures from spotting and staining.
• Enhances the cleaning actions of soaps and detergents in your laundry and kitchen.
• Reduces bacterial build-up in your toilets.
• Reduces the presence of harmful fungus in your bath and shower.
• Enhances the flavor of foods, beverages and ice.
• Promotes healthier plants and grass if used on your irrigation system.
• Economical - provides better-than-bottle-quality water throughout the house for less than the cost of buying two bottles of packaged water each day from your grocery store. You only pay the initial cost of the unit plus installation and this eliminates the inconvenience of monthly service calls, salt, chemicals and maintenance.

WELLNESS HOME BENEFITS

• Softens water without chemical additives and reduces scale on pipes & hot water systems throughout your home.
• Removes iron and the associated staining of surfaces and garments and prevents bleaching of clothes, lasting longer.
• Inhibits the growth of algae, bacteria, and mold in pools, spas, & ponds with the bio-static properties of Wellness Water™.
• Enhances the cleaning action with soaps and detergents, and removes residues for softer, healthier skin.
• Anti-bacterial properties reduce bacterial build-up in a household toilet or the garden ponds - less cleaning and maintenance.
• Accelerates rate of growth of plants, halves the need for fertilizer and eliminates entirely the need for chemical fungicides.
• Provide your pets with the same health benefits you experience.
  

Water the Way Nature Intended It

What is in the Filter Media?

Taichoseki is a proprietary media used in all Wellness Filters¨. On December 15, 1990, the Kitazato Medical School of Public Health in Tokyo, having found that it greatly inhibits the growth of fungus and bacteria, approved Taichoseki mineral stone as a natural disinfectant . The Medical School's studies found that water treated by Taichoseki mineral stone slows down and even stops the growth of fungus and bacteria, including staphylococcus aureus, bacillus subtilis, aspergillus niger, myrothecium verrucaria, trichophyton interdigitale, and candida albicans. This mineral also removes iron, cadmium, and many harmful substances in tap water.

Bakuhanseki is a proprietary media used in all Wellness Filters¨. On October 15, 1995, the Japanese Government's Ministry of Health, Drug Approval Division, gave their approval of the bakuhanseki stone as an approved medicine. The stone is approved for medical purposes in powdered form (oral or skin application), dissolved in water, and for use in water filters for bathing and drinking. The Ministry of Health uses Wellness Filter¨ water in their hospitals and in many of their approved health bathing spas. (Note: Because the Bakuhanseki mineral stone is designated as a medicine, treatments in health spas are covered by Japanese Government medical plans.) The Bakuhan mineral adjusts the water to a stable alkaline pH, increases dissolved oxygen, removes harmful substances and enhances the taste of the water. It will also remove lead, mercury, and chromium from tap water. It imparts trace Angstrom size minerals (silica, potassium, and magnesium).

SPG Sand - Obtained from volcanic rocks, the surface area of this material is 6.16 sq. meters per gram and provides 0.5-micron level filtration. Produces high efficiency filtration, removes parasites and adsorbs trace heavy metals, and yields very pure water.

Granulated Activated Carbon - Made from highest quality coconut shell carbon. Removes chlorine, chlorinated hydrocarbons, organics, volatiles, MTBE, tastes and odors.

Magnet & Magnetite Stone - High flux density (greater than 4,500 gauss) magnetic stone and magnets create magnetic field in filter for magnetic resonance activation of the water. Lowers surface tension, increases solubility and increases absorptivity.

Far-Infrared Ceramic - Proprietary ceramic media made from far infrared emitting stone at 2,200¡F. Produces hydroxyl ions and hydrogen ions, which neutralize free radicals. Believed to aid the body in fighting immune disorders, diabetes, cancer, and heart disease.

Installation and Operation Manual

Thank you for selecting the Wellness Filter M.G. III to purify and enhance your water quality. The instructions, guidelines, and safeguards detailed in this manual will help ensure that your new system operates effectively. Please read the manual carefully before installing and using your filter system. Retain this manual for reference and warranty purposes. For optimum health, drink plenty of fresh, great-tasting water every day!

Benefits and Features of the Wellness MG-III

1. Provides pure, energized water for the entire home
2. Reduces harmful contaminants from the kitchen, shower, bath, and ice-making system leaves your dishes and clothes wonderfully clean
3. Retains beneficial forms of minerals such as magnesium and calcium while reducing the negative effect these minerals may have, such as scaling in water lines and on heating elements.
4. Optimizes digestion and waste elimination
5. Moisturizes the skin and hair when bathing in it
6. Softens the water without chemicals
7. Assists in the reduction of skin ailments such as psoriasis, eczema, and acne \\\\\\\\
8. Improves dental hygiene by reducing plaque-forming bacteria
9. Promotes the development of a lush and healthy landscape (grass, plants, and flowers)
10. Cost savings ø reduced use of soaps and detergents
11. Eliminates the need for and the expense of chemicals, cartridges, and replacement parts
12. Automatically backwashes and regenerates itself

U.S. Patent 5,628,900 and patents pending

Testimonials From Users

The Wellness Filter™, which is much more than a filter, purifies and enhances water the way it is naturally filtered through the earth's geographic strata. Consuming contaminant-free water is of paramount importance to the diabetic and non-diabetic. The Wellness Filter™ was recently awarded our U.S. Seal of Approval as a safe and beneficial product for diabetic use.
Sandy D. Corlett, President, Diabetes Resource Center, Inc.
~~
We tested the Wellness Filter¨ against other water products including so called specialty bottled waters like Pentahydrate™ to determine their direct hydrating capability. The results seen with the Wellness Filter¨ were the highest we have ever tested to date.
Dr. Jaroslav Boublik, Scientific Director, AquaConneXions, Pty. Ltd.
~~
We have found that the Wellness Filter¨ takes water to a new level in purity and performance. Taking nutritional products with Wellness Filter water gives the consumer the ultimate health benefit.
Jeff Lion, President, Douglas Laboratories
~~
We have been very impressed with the improved quality, taste, and feel of our clubhouse water since installing a large Wellness Filter¨ several months ago. Club members have also commented about the improved taste of their drinks because of the water/ice. I have one for my new home, showing noticeable benefit in hair and skin care but household plants are thriving as well. We are now looking at numerous applications of using Wellness Filter¨ water on our golf course.
Jeff Reynolds, Owner/Developer, Indian River Club, Vero Beach, Florida
~~
The improvement in our water quality has been dramatic. I didn't realize that there was anything wrong with it until I tasted Wellness Water. Our customers have noticed and have made unsolicited comments about their drinking water and ice cubes. Our chef, Dale Miller, is one of fifty-five Certified Master Chefs in the U.S. Dale has noticed that his sauces taste better and his pastries look better. Our coffee tastes better as well. He feels so strongly about the Wellness Filter¨ that he will be recommending it to the Culinary Institute, his alma mater. The quality of our operation has been dramatically improved. Dishes, pots and pans, glassware, and silverware don't spot. The Wellness Filter¨ has all but eliminated this problem. The cost savings has to do with my confidence that all of the fixtures that have water running through them will last longer due to the filtered water's cleaning effect. The same is true of our pipes. The Wellness Filter¨ has now become an integral part of our tradition of excellence.
Brad Bronstein, President, Jack's Oyster House, Albany, New York
~~
Our chef reports better tasting stocks, pasta, and shrimp. Rice and vegetables are brighter and tastier due to this filter. Our dishwashing machine uses less chemicals and steamer equipment performs better. Our coffee distributor noticed that the machine required less maintenance and customers report better tasting coffee as well as tastier drinks. Our dishes are cleaner and silverware free from spots. Our ice machines and steamers require less cleaning. We save on chemicals used in our washing machines, and fuel consumption to operate hot water tanks has been lowered. Towels are softer and smell better due to the water conditions. We have eliminated our expensive water softening system and estimate that the unit will pay for itself in only a few months. We have four operations all having various water conditions and we have ordered Wellness Water units for each operation. Maybe that says it all.
Martin Patton, President, Cathedral Farms, Inc.
~~
We have experienced the Wellness Filter¨ for about a month and the results are incredible. In steaming or boiling of vegetables and legumes as well as the sauce reductions, products maintain the basic flavor and aroma a lot better. Vegetables and salads retain crispness and colors much better after the washing. The Wellness Filter¨ has improved the quality of our operation from cooking to cleaning with prospects that, in the long run, the filter will prove to have improved the life and maintenance of pipes, water taps, and drains. We are very happy with our decision to install the Wellness Filter¨ at San Domenico.
Tony May (Restauranteur of the Year, 2000), San Domenico Restaurant, New York City

Disclaimer: This product is not intended to diagnose, treat, cure, or prevent any disease. The material presented here is informational, and is not intended as simply a solicitation to sell devices.

Technical Information and Installation

Before You Start (must read):

1. Unit must be installed to meet the current National Electric Code, as well as any applicable local plumbing, electrical, heating and air conditioning codes.
2. This unit is not normally recommended for well applications. If your water source is a well, please contact Wellness Support at (800) 428-9419 before installation. You should have your water tested by a certified water laboratory.
3. Wellness Enterprises will not be held liable for damages, including any and all water damage caused by this product. It is recommended that the homeowner consider the use of an electronic water shut off system (such as WaterCop ø http://www.watercop.com ) if significant damage may result in the event of an unexpected leak in this device or any other plumbing device

IMPORTANT NOTE

The Wellness M.G. III is packaged to eliminate damage in shipping. Please ensure that you retain the packaging that the unit arrives in for at least the 90 Day Satisfaction period. In the event of a return for service, if you are unable to provide the original packaging, you will be required to pay the cost of shipping and packaging items (approximately $50) for Wellness to send a set of packaging to you, in addition to the normal costs of shipping the product to Wellness.

IMPORTANT NOTE

A drain line is not included with assembly.

1. Make sure a hose is installed properly to the white drain port (Wellness recommends using a polyethylene hose or garden hose, and using a clamp to secure the hose in place).
2. White drain port may need to be tightened before the drain line is installed (Wellness recommends using Teflon tape to improve the seal).

NOTE: POWER OUTAGES

During a power outage, your filter will remain operative and the internal settings will remain the same. The clock will delay according to the amount of time the power is out. Therefore, Wellness recommends that you periodically check time settings and perform a manual backwash to insure the filter head is working properly.

If you are located in an area that experiences frequent power outages, you may wish to purchase a small UPS from your local electronics store to maintain power to the clock during brief outages.

GENERAL INSTALLATION CHECKLIST

**POTABLE WATER ONLY**

WATER PRESSURE

A minimum of 20 pounds of water pressure per square inch (psi) is required for the filter to operate effectively. Water pressure should not exceed 100 psi. If your water pressure is close to 100 psi, you must have a plumber install a pressure regulator on your master line before the M.G. III.

ELECTRICAL FACILITIES

An uninterrupted alternating current 110V(AC), 60 Hz, supply is required. Please make sure the existing voltage supply is compatible with the unit before installation and that a power source is within reach of the unit's power cord.

EXISTING PLUMBING

The condition of the existing plumbing should be free from lead, lime, and iron buildup. Piping that is heavily built up with lead, lime, and/or iron should be replaced. All new plumbing should be performed in accordance with local plumbing codes.

WATER TEMPERATURE

This unit is rated to operate within a temperature range of 34 F ø 110 F and should not be subjected to freezing conditions.

LOCATION OF FILTER UNIT

The filter unit may be installed either indoors or outdoors on a level, stable surface. Wellness Enterprises, LLC, IS NOT responsible for any and all damage done to any property or dwelling or any expense caused by a leak in the M.G. III or any products supplied by Wellness Enterprises, LLC. If this product is being installed in an area where a leak may cause damage (i.e. a basement or a garage installation) the customer is advised to install an automatic leak detector and shut off valve (available from www.watercop.com and other sources).Bolting the filter to the surface is optional. For outdoor installations, a concrete foundation is suggested. Covering the top of the unit (controller) from direct exposure to the elements is also encouraged.

~ CAUTION ~ Failure to install the filter in accordance with the above guidelines and local building codes may result in injury or product failure and will void your warrantee. Wellness Enterprises, LLC is not responsible for any injury or consequential damages resulting from improper installation.

~ CAUTION ~ Water that is microbiologically unsafe, contains unusually high-suspended solids, or has extremely high concentrations of chemicals or other elements, cannot be used with your Wellness Filter. Well water tests must be submitted to Wellness Enterprises, LLC for evaluation prior to installation. This warning is also in effect should initial water quality change or deteriorate.

INSTALLATION PROCEDURES

Due to large variances in local plumbing codes across the country, State and Local plumbing code compliance is the responsibility of the buyer. Such codes may require the use of copper tubing and the services of a licensed plumber, or may restrict the types of pipe adhesive than can be used to join the plastic components. The plumbing components included in this package are complimentary and designed for ease of installation only in areas where the components meet local codes.

1. Read Installation Manual before proceeding with installation.
2. Decide where the filter will be located and evaluate the system and installation requirements (water supply, drain, electric supply, foundation, etc.) necessary for proper installation and operation of the unit.
3. Turn off main water supply and install filter to water source in accordance with the following example and with building codes.

*NOTE: You or your plumber may substitute plumbing components for the supplied component as long as they meet local building codes and the materials to not leach any undesirable byproducts into the water.

IMPORTANT NOTE

1. Make sure that the water source connection to the bypass manifold is connected where the arrow faces into the filter.
2. Make sure that the water outlet connection to the bypass is connected where the arrow faces away from the filter.

*NOTE: A drain tube from the backwash drain outlet is required, but is not included. Ensure that either a hose is installed properly to the white drain port (Wellness recommends using a polyethylene hose or garden hose, and using a clamp to secure the hose is in place) or that the drain line is hard plumbed to a suitable drain. The white drain port may need to be tightened before the drain line is installed (Wellness recommends using Teflon tape to improve the seal).

FILLING THE FILTER WITH WATER

1. To fill the filter with water, slowly open the Bypass Valve (move red lever from left to right as shown
2. Slowly open the water main.
3. Slowly open a nearby cold water tap and let the water run until all air is purged from the unit.
4. Close the cold water tap.
5. Check for leaks

SET VALVE MASTER PROGRAMMING

1. Plug the valve into an approved power source. Once the valve is powered, it will drive to the service position.

NOTICE:

During a power outage, your filter will remain operative and the programmed settings will be saved. However, the regeneration function will be paused until the power is reset and the time displayed on the controller will be lost. Frequent or extended power outages will prevent the M.G. III from regenerating and may compromise performance.Therefore, Wellness recommends that you periodically check time settings and implement a manual regeneration whenever you have to reset the time on the controller. It is recommended that you manually implement a regeneration cycle once every three months to verify the controller is working properly and flushing water out the drain line during the regeneration cycle (simply press and hold the extra cycle button for five seconds ø located to the bottom left of clock under the word Program on the controller).If you are located in an area that experiences frequent power outages, you may wish to purchase a small UPS from your local electronics store to maintain power to the clock during brief outages.

*NOTE: Push either the SET UP or SET DOWN set button once to adjust the display by one (1) digit. Push and hold either button to adjust the display by several digits. Push the EXTRA CYCLE button to set the program item and to move to the next program item.

1. Set the Time or Day display to 12:01 p.m. Please note that this time setting is mandatory for entering Master Programming Mode. If set differently, full programming cannot occur.
2. Push and hold both of the SET UP and SET DOWN buttons for five (5) seconds to enter Programming Mode.
3. Set display format to U.S. format [U - - 1] for 12-hour Timekeeping Display format and Cycle (Regeneration) Timing Display in minutes. Push the EXTRA CYCLE button to set the format and move to next program item.
4. Set Regeneration (Backwash) type to Time Clock Delayed [7 - - 1]. Regeneration (Backwash) will occur at a preset time that will be set in the next program item. Push the EXTRA CYCLE button.
5. Set Regeneration (Backwash) to occur when water usage can be interrupted for up to 30 minutes, such as during the middle of the night, e.g., 3:00 a.m. [3:00] (P.M. indicator 'dot' NOT on). Push the EXTRA CYCLE button.
6. Set the number of days between Regeneration (Backwash). A setting of once every seven (7) days is suggested for normal household use of municipally-treated water [A - - 7]. (Fewer days between backwashings may be necessary for water containing high amounts of contaminants). Push the EXTRA CYCLE button.
7. Set the Duration Time of Regeneration (Backwash Cycle 1). A setting of 15 minutes is suggested if the filter is being backwashed once every seven (7) days as set in Item #6 above [1 - - 15]. Less time is required if backwash occurs more frequently, while more time is required if backwash is set to occur less frequently. Push the EXTRA CYCLE button.
8. Since Regeneration Cycle 2 is not used, set for '0' minutes [2 - - 0]. Push the EXTRA CYCLE button.
9. Set the Duration Time for Regeneration Cycle 3 (Rapid Rinse). A setting of 5 minutes is suggested for this Rapid Rinse Cycle, e.g. [3 - - 15]. Push the EXTRA CYCLE button.
10. Since Regeneration Cycle 4 is not used, set for ' 0' minutes [4 - - 0]. Push the EXTRA CYCLE button.
11. Regeneration Cycle 5 is preprogrammed at OFF . Push the EXTRA CYCLE button to advance to the next item.
12. Valve Type is preprogrammed for this valve [0 - - 1]. Push the EXTRA CYCLE button to advance to the next item.
13. Set Line Frequency for 60Hz [LF 60]. This is the standard frequency in the United States. Use of the filter in other countries may require a frequency setting of 50Hz. If you are installing this unit outside the U.S., please check with a local electrician before setting. Push the EXTRA CYCLE button.
14. Master Programming Mode is exited, and normal operation is in effect (the service indication light is ON ).
15. Set the Time of Day to the correct time, using the SET UP or SET DOWN buttons to adjust the time (please note the P.M. indicator).
16. Start a Regeneration immediately. Press and hold the EXTRA CYCLE button for approximately five (5) seconds to initiate Backwash and Rapid Rinse functions to settle and activate the media material. A stream of black-tinged water may appear in the initial backwash. This is the fine powder of activated carbon which will disappear as the Backwash and Rapid Rinse progress. Because the filter is new, a full Backwash and Rapid Rinse are not necessarily required. However, we suggest a cycle time of at least five (5) minutes for each function at this time. To fast-cycle through Backwash and Rapid Rinse, push the EXTRA CYCLE button once after five (5) minutes has expired for each cycle to advance to the next cycle.

CONGRATULATIONS! Your filter is now ready for use.

NOTES REGARDING THE OPERATION OF THE VALVE

In normal Service operation, the Time-of-Day display will be visible at all times. The controller will operate normally until the number of days since the last Regeneration or Backwash reaches the number of days programmed in STEP 6 above. Once this occurs, a Regeneration Cycle will then be initiated at the preset Regeneration time programmed in STEP 5 above.

While in normal Service operation, performing STEP 15 above can change the current time of day or an immediate Regeneration (Backwash) can be initiated by performing STEP 16.

To change any programming settings, begin with STEP 1 above.

** If you loser power to your controller, all programming is saved but the time of day must be reset.

CONTROL OPERATION DURING REGENERATION

During backwashing, the controller will display a special Regeneration Display. In this display the control will show the current Regeneration step number the valve is advancing to, or has reached, and the time remaining in that step. The step number displayed will flash until the valve has completed driving to this Regeneration stop position. Once all regeneration steps have been completed, the valve will return to Service and resume normal operation.

For example: Pushing the EXTRA CYCLE button during a Regeneration Cycle will immediately advance the valve to the next cycle step position and resume normal step timing.

CONTROLLER OPERATION DURING A POWER FAILURE

During a power failure all control displays and programming will be stored for use upon power re-application. The control will retain these values for years, if necessary, without loss. The control will be fully inoperative and any calls for regeneration will be delayed. Upon power re-application, the control will resume normal operation from the point where it was interrupted. An indication that a power outage has occurred will be an inaccurate time-of-day display. Reset the Time Display to the current time by pushing the SET UP and SET DOWN buttons as appropriate.

** If the power was out for more than 1 day, manually initiate a backwash by pressing the extra cycle button for 5 seconds.

CHECK THE FOLLOWING BEFORE YOU CALL FOR SERVICE
A significant drop in water pressure and/or water from the faucet that tastes or appears unusual may be a sign that the valve or filter is malfunctioning.

FOR PROBLEMS RELATED TO WATER PRESSURE

1. First determine whether or not the problem is due to the valve or the filter. Test your tap water supply by bypassing the filter as follows:
2. Close all faucets in Home
3. Turn the levers on the Bypass to their BYPASS Mode position (East-West) as shown in the picture at far right.
4. Compare and evaluate the water pressure.If the water pressure is the same, the problem is related to the water supply. Contact your system supplier or installer.

To open the Bypass for filtered water, repeat the above steps, turning the Bypass valves to their Filtration Mode position (North-South).

If the water pressure improves, or your problems are related to taste or appearance, bypass the filter as described above and promptly contact your distributor or call Customer Service at (800) 428-9419 or Email support@wellnessfilter.com.

Five Year Limited Warranty

WELLNESS ENTERPRISES, LLC warrants The Wellness Filter M.G. III for five (5) years from the date of purchase against all defects in materials and workmanship when installed and used in compliance with this Installation Manual.

To allow WELLNESS ENTERPRISES, LLC to record your ownership of this product, start your warranty coverage cycle, and send you any applicable product reports or announcements please complete and return the Warranty Information Card below. You should also make a copy for your records. The Warranty Card must be returned within 30 days of purchase in order to validate warranty.

WELLNESS ENTERPRISES, LLC will replace or repair any part which, in our opinion, is defective, if the filter, furnishings, and fixtures have not been subjected to tampering, alteration, or improper use or transportation after delivery and have not been repaired by anyone except WELLNESS ENTERPRISES, LLC or an authorized representative. WELLNESS ENTERPRISES, LLC's obligation does not include any costs related to shipping and transportation. WELLNESS ENTERPRISES, LLC is not responsible for damage in transit, the customer should present claims for such damage to the carrier.

WELLNESS ENTERPRISES, LLC makes no warranties, expressed or implied, including, without limitation, any warranties of fitness or merchantability except as expressly set forth above. WELLNESS ENTERPRISES, LLC shall not be liable for any anticipated or lost profits, incidental damages, consequential damages, costs, time charges, or other losses incurred in connection with the purchase, installation, repair, or operation of the filter, and we do not authorize anyone to assume for WELLNESS ENTERPRISES, LLC any liability in connection with the filter or any part thereof. WELLNESS ENTERPRISES, LLC reserves the right to modify the design of our products at any time without notice.

This warranty shall NOT apply to:

1. Failures resulting from use of water not suited to drinking, as outlined in current AWWA guidelines*.
2. Failures due to normal wear, accident, misuse, abuse, negligence, or contamination in source water supplies.
3. Damage due to failure to follow operating instructions and maintenance requirements.
4. Products that are altered, modified, or serviced in a manner not authorized by WELLNESS ENTERPRISES, LLC in writing.
5. Failure of goods due to use other than what was originally intended.
6. Damage due to failure to follow published laws, regulations, and codes.

For servicing under this warranty, contact the Customer Service Department at 1-800-428-9419 and explain the problem in detail. Repair or replacement of the filter by WELLNESS ENTERPRISES, LLC requires the submission of this Warranty and may require the return of the filter to WELLNESS ENTERPRISES, LLC at your cost.

WARNING: Many insurance providers have recently modified their homeowner's coverage policy as they relate to leaks associated with a water treatment system and will not provide coverage in the event of a leak. This unit has been engineered to be installed outdoors where a plumbing leak would not cause damage to your home (please be certain to protect from freezing if you live in an area that experiences a hard freeze). While this unit has been engineered to the highest standards, there is always a risk of an unanticipated failure which could cause excessive flooding. If this unit is installed indoors where flooding related damage may occur, you are hereby notified that you are assuming all risk associated with any such damage. It is strongly recommended that you install an automatic leak detector and shut off valve (available from www.watercop.com and other sources).

Wellness Enterprises, LLC, IS NOT LIABLE for any and all damage to any property or dwelling or any expense caused by or related to a leak in this or any products supplied by Wellness Enterprises, LLC.

Invest in your home, health, and appearance 
...order your Wellness MG-III system today.

REFURBISHMENT PLAN

Rated for a minimum of 10 to 15 years service, depending on your usage requirements. The Wellness Home¨ is offered with a refurbishment plan that will allow users to replace the filter media after 10 to 15 years, without the expense of buying a new unit.

The standard Wellness Home¨ media (excluding carbon and KDF-55) will last for approximately forty (40) years prior to needing replacement. The carbon will last approximately 15 years prior to needing refurbishment. Our refurbishment plan saves you from buying another unit.